DualForce™ Ring Forceps

/DualForce™ Ring Forceps

DualForce™ Ring Forceps

Engineered for more than just tight contacts, DUALFORCE is a complete matrix system designed for use with all Class II composite restorations. The DUALFORCE System consists of clinically and technologically advanced Rings, Active-Wedges, and Ultra-Wrap Matrix Bands.
 


 

Description

  • Prevents overextension and Ring fatigue during placement.
  • Properly angled engagement tips that match DualForce Rings for easy placement.
  • Thick gauge steel for added stability.
  • Fits virtually all hand sizes.

Clinical Technique


Dentistry and Photography Courtesy of Dr. Robert Margeas.

Resources

Click here to view the DualForce Sectional Matrix System Product Sheet.

Click here to view the DualForce Sectional Matrix System Dental Product Shopper Product Spotlight.

Dr. Michael Miyasaki on the DualForce Sectional Matrix System from Clinician’s Choice on Vimeo.

Instructions For Use / SDS

Click here to view the DualForce Sectional Matrix System Instructions For Use/SDS.

Testimonials

Product Configurations

  • Ring forceps single unit

FAQ

How do I prevent the DualForce ring from popping off the tooth?2019-04-08T15:22:49-04:00

Ensure that the DualForce Ring is fully seated by gently pressing down on the plastic separating prongs (never directly on the dual NiTi rings) once it is placed on the tooth.

How do I prevent the plastic on the rings from breaking?2019-04-08T15:23:49-04:00

Ensure that the proper sterilization temperature and method are being used.
It is recommended to use a steam autoclave at 273
oF only.

Ensure that the ring is expanded sufficiently to avoid premature contact of the separating prongs with the tooth as it is being seated.

Are there any tips for placement?2019-04-08T15:24:12-04:00
  1. Approach the tooth with the expanded ring at a 45o angle. 
  2. Place the separating prongs as close as possible to the gingival crest and gently press down on the plastic to ensure that it is fully seated. The dual NiTi rings themselves should never be manipulated as this will cause the separating prongs to shift.
  3. DualForce Rings are designed to sit at a 20o angle to allow for nesting of a second ring, to avoid a rubber dam clamp, and to clear an adjacent prominent cusp.

You may also like…