DualForce™ Ultra-Wrap™ Matrix Bands

/DualForce™ Ultra-Wrap™ Matrix Bands

DualForce™ Ultra-Wrap™ Matrix Bands

DualForce Ultra-Wrap™ Matrix Bands are designed to wrap the tooth snugly, making them truly versatile. DualForce bands are thin, yet stiff enough to prevent crimping during placement. An interproximal contour and marginal ridge ensure a natural contact is created every time.
 


 

Description

  • Curved marginal ridge of matrix bands reduces finishing time
  • Proximal contour of band ensures optimal contact position and shape
  • Matrix tab allows easy placement and removal
  • Available in three sizes (4.5mm, 5.5mm and 6.5mm)
  • Unique Punch Pliers (included in Complete Kit or sold individually) allow for an easy grip of the matrix band when placing; while punching the band for secure removal

Clinical Technique

Dentistry and Photography Courtesy of Dr. Sergio Rubenstein

Resources

Click here to view the DualForce Sectional Matrix System Product Sheet.

Click here to view the DualForce Sectional Matrix System Dental Product Shopper Product Spotlight.

Videos

DualForce Matrix Bands from CCI/CRD on Vimeo.

Instructions For Use / SDS

Click here to view the DualForce Sectional Matrix System Instructions For Use/SDS.

Testimonials

Product Configurations

Ultra-Wrap Matrix Band Refills:

  • 4.5mm 100-pack
  • 5.5mm 100-pack
  • 6.5mm 100-pack

DUALFORCE Complete Kit: 1 x Pre-Molar Ring (Orange), 1 x Molar Ring (Green), 25 x 4.5mm Ultra-Wrap Matrix Bands, 25 x 5.5mm Ultra-Wrap Matrix Bands, 25 x 6.5mm Ultra-Wrap Matrix Bands, 20 x Active-Wedge #1 (Purple), 20 x Active-Wedge #2 (White), 20 x Active-Wedge #3 (Blue), 20 x Active-Wedge #4 (Green), 20 x Active-Wedge #5 (Black), 1 x Punch Pliers 1 x Ring Forceps

DUALFORCE Starter Kit: 1 x Pre-Molar Ring (Orange), 1 x Molar Ring (Green), 25 x 4.5mm Ultra-Wrap Matrix Bands, 25 x 5.5mm Ultra-Wrap Matrix Bands, 25 x 6.5mm Ultra-Wrap Matrix Bands, 20 x Active-Wedge #1 (Purple), 20 x Active-Wedge #2 (White), 20 x Active-Wedge #3 (Blue), 20 x Active-Wedge #4 (Green), 20 x Active-Wedge #5 (Black)

FAQ

How do I prevent the DualForce ring from popping off the tooth?2019-04-08T15:22:49-04:00

Ensure that the DualForce Ring is fully seated by gently pressing down on the plastic separating prongs (never directly on the dual NiTi rings) once it is placed on the tooth.

How do I prevent the plastic on the rings from breaking?2019-04-08T15:23:49-04:00

Ensure that the proper sterilization temperature and method are being used.
It is recommended to use a steam autoclave at 273
oF only.

Ensure that the ring is expanded sufficiently to avoid premature contact of the separating prongs with the tooth as it is being seated.

Are there any tips for placement?2019-04-08T15:24:12-04:00
  1. Approach the tooth with the expanded ring at a 45o angle. 
  2. Place the separating prongs as close as possible to the gingival crest and gently press down on the plastic to ensure that it is fully seated. The dual NiTi rings themselves should never be manipulated as this will cause the separating prongs to shift.
  3. DualForce Rings are designed to sit at a 20o angle to allow for nesting of a second ring, to avoid a rubber dam clamp, and to clear an adjacent prominent cusp.

You may also like…