A.S.A.P. Dailies All Surface Access Diamond Polishers

Home/A.S.A.P. Dailies All Surface Access Diamond Polishers

A.S.A.P. Dailies All Surface Access Diamond Polishers

Take esthetics to a new level of efficiency and convenience with A.S.A.P.® Dailies, the next generation of daily use polishing from Clinician’s Choice.®

Description

  • A.S.A.P. Dailies provide all surface access polishing for direct or indirect restorations including: composite, ceramic, zirconia, lithium disilicate and provisionals.
  • A.S.A.P. Dailies are designed for multi-use in a single day and deliver a fast, high shine polish in as little as 30 seconds.
  • Delivers consistent results after multiple sterilization cycles.* The diamond impregnated A.S.A.P. Dailies reduce your cost-per-use without sacrificing performance.

*Minimum 3 sterilization cycles.

Clinical Technique

Photography and dentistry courtesy of Bob Margeas, DDS.

Upper right central composite veneer after pre-contouring with Contours™ Finishing and Polishing Discs.
Using a light wiping motion, the 45-micron diamond impregnated Pre-polisher is applied to the restorative surface.
The Final High Shine Polisher (peach) is applied for 15-20 seconds. A high luster shine is the result.
Final restoration utilizing Evanesce™ Universal Shade B2 and A.S.A.P. Dailies.

Resources

Videos

 

30-Second Polishing Technique Using A.S.A.P. Dailies All Surface Access Diamond Polishers with Bob Margeas, DDS

 

Creating the Esthetic Temporary: Finishing and Polishing In Just Minutes with Chad Duplantis, DDS, FAGD

 

Introducing the Newest Member of the A.S.A.P. Family – A.S.A.P. Dailies

Instructions For Use / SDS

INTENDED USE: Dental finishing and polishing points intended as a medical device for the purpose of final polishing on composite, RMGI, and some ceramic restorations.
INSTRUCTIONS FOR USE: A.S.A.P. Dailies provide a high shine in two steps with only one shape. 
STEP 1: A.S.A.P. Dailies Pre-Polisher (purple)
1.
Use a finishing diamond/carbide to contour the composite surface.
2. Using a wiping motion, at 3,000 – 8,000 RPM, and with light pressure and intermittent water spray 50mL/min (or dam tooth), apply the primary polisher to the restorative surface. A smooth silky surface will appear in approximately 20 – 30 seconds.
STEP 2: A.S.A.P. Dailies Final High Shine Polisher (peach)
1.
Again, using light pressure and intermittent water spray 50mL/min (or dam tooth), apply the Final High Shine Polisher to the restorative surface in a wiping motion, until a high gloss finish is achieved. 
NOTE: Excessive pressure on the instrument will lead to overheating and premature degradation of the polisher, as well as possible damage to the pulp. 

Click here to view A.S.A.P. Dailies IFU/SDS (EU)

Testimonials

Bob Margeas, DDS
In only 30 seconds, A.S.A.P. Dailies allow me to access all tooth surfaces and give me composite restorations an amazingly high polish.

– Bob Margeas, DDS

Product Configurations

A.S.A.P. Dailies 50-pack:

  • 25 x Pre-Polisher
  • 25 x Final High Shine Polisher

You may also like…