Affinity™ Putty Hydroactive Impression Material

Affinity™ Putty Hydroactive Impression Material

Affinity™ Putty is a state of the art putty impression material, designed to ensure a feathered edge at the interface with the wash material, to provide a true occlusal plane relationship. Affinity Putty is non-greasy, satiny smooth, and extremely easy to mix.


Conventional putties are often too viscous and resistant to flow, thereby generating a significant amount of compression during the impression procedure. Taking an impression under these conditions promotes distortion and over-displacement of the wash material. Affinity™’s 3rd generation putty is designed to ensure a feathered edge at the interface with the wash material, providing a true occlusal plane relationship.

Clinical Technique

Designed to ensure a feathered edge at the interface of the wash material, AFFINITY Putty is non-greasy, stainy smooth, and extremely easy to mix.


Instructions For Use / SDS

Click here to view the Affinity Putty Instructions for Use / SDS.

Product Configurations

  • 1-305mL jar catalyst, 1-305mL jar base, 2 scoops, instructions/SDS


What are the working and set times of both Affinity regular set viscosities and fast set?2019-05-07T15:45:35-04:00

The working time of Affinity Regular Set material is 1:45 mins with a setting time of 2:30 mins.
Affinity Fast Set materials have a working time of 1:10 mins and a set time of 1:45 mins.

How is Affinity different from other impression materials?2019-05-07T15:46:24-04:00

Only Affinity uses branched resin chemistry for 3-dimensional cross-linking resulting in a higher tear strength, refined fillers, and an even distribution of surfactant. Other impression materials use linear resin chemistry with an uneven distribution of surfactant resulting in less accurate impressions that are more prone to tearing of the thin interproximal and sulcus fins.

I really like my light body from another brand. Can I use Affinity Heavy Body (or other Affinity Tray Materials) and my light body together?2019-05-07T15:47:55-04:00

Light and heavy body materials from another brand may be mixed but strict attention must be paid to the working and set times as they need to mimic or exceed Affinity’s.

How can I prevent air bubbles in my wash material?2019-05-07T15:48:11-04:00

Always keep the tip of the mixing tip fully immersed in the Light Body fully as it is syringed around the prep sites.

I’m having difficulty loading Affinity InFlex into Quad-Trays. Are there any tips that will help?2019-05-07T15:48:27-04:00

It is important to work quickly when loading Quad-Trays. Dispense Affinity InFlex in an S-pattern onto the non-prep side after running a bead of material around the periphery of the tray. Immediately turn the Quad-Tray over and repeat on the prep side.

Affinity sets more quickly compared to what I was using before. What can I do?2019-05-07T15:48:40-04:00

If using Fast Set, switch to Affinity Regular Set impression material. Do not attempt to adjust the temperature of the material in order to slow down the set.

You may also like…