D-Fine™ Shape & Shine Single Step Diamond Polishers

Home/D-Fine™ Shape & Shine Single Step Diamond Polishers

D-Fine™ Shape & Shine Single Step Diamond Polishers

D-Fine Shape & Shine Single Step diamond impregnated polishers allows clinicians to effortlessly shape, contour, and polish cured composite material, all in a single step.

Description

  • 45 micron size diamond particles can conservatively contour composite when additional pressure is applied
  • During polishing, diamond particles continuously break down, getting smaller in just seconds; resulting in a high luster, unrivalled finish on all hybrid and nano-filled composite materials
  • Autoclavable at 270°F to 275°F, providing 6-10 uses per polisher
  • Available in 6 shapes to facilitate all restorative requirements

Clinical Technique

Nanofil composite veneer adapted and light-cured.

Final high lustre composite surface created using the Shape & Shine polishers.

Dentistry and photography courtesy of Dr. Robert Margeas.

Resources

Instructions for Use / SDS

 

INTENDED USE:

Dental finishing and polishing points intended as a medical device for the purpose of final polishing on all composite hybrid and nano-filled restorations.

Shape & Shine Polishers have the ability to shape and contour cured composite material as well as create an unrivalled polish, all in a single step. Diamond-impregnated Shape & Shine Polishers can also be used to conservatively contour composite when additional pressure is applied. During polishing, the diamond particles continuously break down, getting smaller in just seconds, and provide a high luster finish to all hybrid and nano-filled composite materials.

INSTRUCTIONS FOR USE:

To Polish Composite: Using a slow speed handpiece between 8,000 – 15,000 RPM, apply light pressure with intermittent water spray in a wiping motion. In just 30 – 60 seconds, a high gloss finish will appear.

To Shape & Polish Composite: Using a slow speed handpiece at between 8,000 – 15,000 RPM, with water spray, apply moderate to heavy pressure in areas requiring re-shaping. Continuously check surfaces, while contouring composites to achieve desired results. After contouring the composite, apply only light pressure with intermittent water spray until a high gloss finish is achieved. PLEASE NOTE: Contouring composite will degrade Shape & Shine Polishers more quickly than polishing alone.

RECOMMENDED STERILIZATION:

Sterilize after each use. Autoclave at 270-275°F/132-135°C

Product Configurations

Shape & Shine Trial Pack:

  • 12 x Polishers – 2 of each shape

Shape & Shine Refill Pack:

  • 10 x Polishers – Single shape (specify shape: #01, #02, #04, #05, #06, #08)

You may also like…