Affinity™ Tray Adhesive is one of the few adhesives currently available that provides outstanding adhesion between the impression material and the plastic impression tray.
Affinity™ Tray Adhesive
Description
- Tray adhesive chemically bonds to the impression material and tray
- Eliminates the chance of separation during impression removal from the mouth
- Brush a thin, even layer of adhesive onto the tray and allow to dry
- Can be pre-applied and left on the tray as it is chemically activated by Affinity VPS Impression Material
- Use only Affinity Tray Adhesive with hydroactive Affinity VPS impression materials
Instructions for Use / SDS
Click here to view the Affinity Tray Adhesive Instructions for Use / SDS.
Product Configurations
- 2-Pack: 2-30ml bottles
FAQ
What are the working and set times of both Affinity regular set viscosities and fast set?cciwp2019-05-07T15:45:35-04:00
The working time of Affinity Regular Set material is 1:45 mins with a setting time of 2:30 mins.
Affinity Fast Set materials have a working time of 1:10 mins and a set time of 1:45 mins.
How is Affinity different from other impression materials?cciwp2019-05-07T15:46:24-04:00
Only Affinity uses branched resin chemistry for 3-dimensional cross-linking resulting in a higher tear strength, refined fillers, and an even distribution of surfactant. Other impression materials use linear resin chemistry with an uneven distribution of surfactant resulting in less accurate impressions that are more prone to tearing of the thin interproximal and sulcus fins.
I really like my light body from another brand. Can I use Affinity Heavy Body (or other Affinity Tray Materials) and my light body together?cciwp2019-05-07T15:47:55-04:00
Light and heavy body materials from another brand may be mixed but strict attention must be paid to the working and set times as they need to mimic or exceed Affinity’s.
How can I prevent air bubbles in my wash material?cciwp2019-05-07T15:48:11-04:00
Always keep the tip of the mixing tip fully immersed in the Light Body fully as it is syringed around the prep sites.
I’m having difficulty loading Affinity InFlex into Quad-Trays. Are there any tips that will help?cciwp2019-05-07T15:48:27-04:00
It is important to work quickly when loading Quad-Trays. Dispense Affinity InFlex in an S-pattern onto the non-prep side after running a bead of material around the periphery of the tray. Immediately turn the Quad-Tray over and repeat on the prep side.
Affinity sets more quickly compared to what I was using before. What can I do?cciwp2019-05-07T15:48:40-04:00
If using Fast Set, switch to Affinity Regular Set impression material. Do not attempt to adjust the temperature of the material in order to slow down the set.
